Evonik Degussa Protectosil - Application Videos
Contact Print Search Sitemap Log in en | de Evonik. Power to create.
Graffiti Protection with Protectosil ANTIGRAFFITI® and Protectosil ANTIGRAFFITI® SP

Protectosil ANTIGRAFFITI® is durable

=> Protectosil® Application Videos

 

 

Application Basics

Protectosil ANTIGRAFFITI® is a "ready to use" product and will be applied by using HVLP (High Volume Low Pressure) equipment. For durable protection against Graffiti, more than one “coat” may be necessary. The previous “coat” should be dry to the touch before preceeding with the next one.The drying times required, vary between 10 to 60 minutes, depending on the substrate and the weather.

The number of “coats” and the amount of Protectosil ANTIGRAFFITI® required depends on the building material. In general porous building materials require more “coats” than more dense, finely-pored materials.

The temperature of both substrate and air should be between 5 °C and 40 °C during application. Protectosil ANTIGRAFFITI® should not be applied during rain or high winds if the substrate is not enclosed.

More information about applying Protectosil ANTIGRAFFITI® is contained in the Test Patches.
Application Basics Application Basics Application Basics

Typical Protectosil ANTIGRAFFITI® consumption for selected surfaces:

Surfaces Examples Approximate total product consumption in g/m2 Comments
polished mineral polished marble, granite 20-50 polish-in the product
coarse, very low porosity variegated granite 60-100 -
coarse, very low porosity clinker, facade brick 80-120 in most cases an impregnation is necessary
smooth, porous dense concrete 100-150 in most cases an impregnation is necessary
coarse, porous sandstone (red Main, Udelfanger, Bern) opencell concrete, limestone 120-160 in most cases an impregnation is necessary
very coarse, porous to very porous Silesian sandstone, plaster, structured surfaces 120-200 product consumption depends on the impregnation and structure of the substrate